Tail Pipe, Removing And Installing

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Procedure

Fig 1: Tail Pipe, Removing And Installing

Courtesy of AUDI OF AMERICA, LLC

Tightening specification, refer to EXHAUST SYSTEM OVERVIEW .

Proceed as follows:

-- Remove the tail pipe -arrow-.

-- Attach end pipe to rear muffler and align.

Fig 2: Checking Distance Of End Pipes At Left/Right To Bumper

Courtesy of AUDI OF AMERICA, LLC

-- Check distance of left and right tail pipes to bumper:

Dimension -x- left = dimension -x- right.