Exhaust Manifold, Removing And Installing: Installation

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specifications, refer to EXHAUST MANIFOLD OVERVIEW .

Install in reverse order of removal. Note the following:

NOTE:

Replace seals and self-locking nuts.

-- Install pre-catalytic converters, refer to CATALYTIC CONVERTERS, REMOVING AND INSTALLING .

-- Install the Throttle Valve Control Module -J338-, refer to Throttle Valve Control Module -J338- .