Rear Left Coolant Pipes: Installing

WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Tightening specifications, refer to COOLANT PIPES OVERVIEW .

Installation is in reverse order of removal, note the following:

NOTE:

Replace O-rings.

Secure all hose connections with hose clamps appropriate for the model. .

-- Install left primary catalytic converter. Refer to LEFT PRIMARY CATALYTIC CONVERTER .

-- Install the power steering pump supply pipe. Refer to POWER STEERING PUMP, REMOVING AND INSTALLING (VEHICLES WITH V12 TDI ENGINE) .

-- Fill hydraulic oil in power steering reservoir and bleed system. Refer to POWER STEERING, CHECKING HYDRAULIC OIL LEVEL

-- Fill with coolant COOLING SYSTEM, DRAINING AND FILLING .