Fan Shroud: Installing
WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specifications, refer to FAN SHROUD AND COOLANT FAN OVERVIEW .
- Additional tightening specification:
| Component | Nm |
|---|---|
| Brake System Vacuum Pump -V192- to body | 9 |
Installation is in reverse order of removal, note the following:
-- Press fan shroud onto radiator until it engages.
-- On a vehicle with air suspension, deactivate vehicle lift mode. Refer to VEHICLE LIFT MODE .