Coolant Pump And Coolant Thermostat Overview
WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Seal
- Replace
- Coolant Pump Housing
- Removal and Installation, refer to COOLANT PUMP
- Bolt
- Tightening specifications item -28- COOLANT PIPES OVERVIEW
- Front Coolant Line
- Removal and installation, refer to FRONT COOLANT PIPE
- O-ring
- Replace
- Seal
- Replace
- Coolant Pump
- Removal and installation, refer to COOLANT PUMP
- O-ring
- Replace
- Bolt
- 9 Nm
- Driveshaft for Coolant Pump
- O-ring
- Replace
- Map Controlled Engine Cooling Thermostat -F265-
- Removal and installation, refer to MAP CONTROLLED ENGINE COOLING THERMOSTAT
- Coolant thermostat opening data, refer to COOLANT THERMOSTAT OPENING DATA
- O-ring
- Replace
- Drain Plug
- 4 Nm
- Bolt
- 9 Nm