Coolant Fans -V7- / -V177-, Removing And Installing
WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Removal
Proceed as follows:
-- Remove fan shroud, refer to FAN SHROUD, REMOVING AND INSTALLING .
-- Free up the electric wires.
-- Remove the bolts -1, 2, 3, 4 and 8- and Coolant Fan -V7- with Coolant Fan Control Module -J293-.
-- Remove the bolts -5, 6 and 7-, the Coolant Fan 2 -V177- and the Coolant Fan Control Module 2 -J671-.
Installation
- Tightening specification, refer to FAN SHROUD AND COOLANT FAN OVERVIEW .
Install in reverse order of removal. Note the following:
-- Install fan shroud, refer to FAN SHROUD, REMOVING AND INSTALLING .