Oil Pressure Switch -F22-

Removing

-- On a vehicle with air suspension, activate vehicle lift mode. Refer to the appropriate service information .

-- Remove the front noise insulation -1-. Refer to the appropriate service information .

Fig 1: Identifying Front/Rear Noise Insulation

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -1-.

Fig 2: Identifying Connector -1- And Oil Pressure Switch -F22- -2-

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Lay a cloth below to catch the draining engine oil.

-- Remove the oil pressure switch -2-.

Installing

Install in reverse order of removal. Note the following:

NOTE:

Replace the seal.

-- Install the noise insulation. Refer to the appropriate service information .

-- On a vehicle with air suspension, deactivate vehicle lift mode. Refer to the appropriate service information .