Oil Pressure Regulation Valve

Removing 

-- On a vehicle with air suspension, activate vehicle lift mode. Refer to the appropriate service information .

-- Remove the front noise insulation -1-. Refer to the appropriate service information .

Fig 1: Identifying Front/Rear Noise Insulation

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -1-.

Fig 2: Identifying Connector -1- And Bolt -2-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -2- and remove the oil pressure regulation valve -N428-.

Installing 

Install in reverse order of removal. Note the following:

• Tightening specifications, refer to UPPER OIL PAN OVERVIEW .

-- Install the noise insulation. Refer to the appropriate service information .

-- On a vehicle with air suspension, deactivate vehicle lift mode. Refer to the appropriate service information .