ADBLUE® Passive Tank And Attachments Overview
NOTE:
Installed location: Lower left on the underbody.
- Lock Washer
- 1.5 Nm
- Underbody Protection
- Bolt
- 60 Nm
- Passive Tank
- For reducing agent
- Removing and installing, refer to ADBLUE® PASSIVE TANK
- Bolt
- 35 Nm
- Filling Line
- From the active tank
- Clipped in on fuel tank
- Vent Line
- To the active tank
- Clipped in on fuel tank
- Metering Line
- From the reducing agent pump -V437- to the reducing agent injector -N474-
- With reducing agent line heater -Z104-
- Clipped in on fuel tankWARNING:
Danger due to reducing agent leaking out.
- To prevent large amounts of reducing agent when opening the metering line, wait for the recirculation process to complete. Refer to SAFETY PRECAUTIONS .
- Transfer Line
- To the active tank
- Clipped in on fuel tank
- Bolt
- 1.8 Nm
- Reducing Agent Transfer Pump -V436-
- Removing and installing, refer to ADBLUE® TRANSFER PUMP
- Hose
- From the passive tank to the reducing agent transfer pump
- Mounting Straps
- Bolt
- 35 Nm