LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q7 3.0 TDI >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 3.0L - Turbocharger, Supercharger - Engine Code(S): CATA >> 21 Turbocharger, Supercharger >> Removal And Installation >> Intermediate Flange

Intermediate Flange

Removing 

-- Remove the rear coolant pipe. Refer to REAR COOLANT PIPE .

-- Remove the primary catalytic converter. Refer to PRIMARY CATALYTIC CONVERTER .

-- Remove the exhaust gas recirculation auxiliary cooler. Refer to EXHAUST GAS RECIRCULATION AUXILIARY COOLER .

-- Remove the bolts -3- and -4- and remove the exhaust gas recirculation pipes.

Fig 1: Connecting Pipe And Bolts
GWWA26-10748Courtesy of AUDI OF AMERICA, LLC
NOTE:

Bolts -1- and -2- were already removed.

-- Remove the bolts -1 and 2- and -arrows- and remove the intermediate flange.

Fig 2: Bolts -1 And 2- And -Arrows-
GWWA21-10386Courtesy of AUDI OF AMERICA, LLC

Installing 

Install in reverse order of removal. Note the following:

NOTE:

Replace the seals

-- Install the exhaust gas recirculation auxiliary cooler. Refer to EXHAUST GAS RECIRCULATION AUXILIARY COOLER .

-- Install primary catalytic converter. Refer to PRIMARY CATALYTIC CONVERTER .

-- Install the rear coolant pipes. Refer to REAR COOLANT PIPE .