LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> Q5 3.2 >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> FINAL DRIVE & DIFFERENTIAL - AUTOMATIC TRANSMISSION 0B6 (2 of 2) >> 39 Final Drive, Differential >> Differential >> Left Flange Shaft, Removing And Installing >> Removing

Left Flange Shaft, Removing And Installing: Removing

-- Tilt the transmission back on the engine/transmission holder so the transmission fluid does not drain out.

-- Remove the bolts -arrows- from the flange shaft mounting bracket.

Fig 1: Identifying Bolts & Flange Shaft Mounting Bracket
GWWA30-10170Courtesy of AUDI OF AMERICA, LLC
NOTE:

Ignore -arrow 2, B-.

-- Remove the left flange shaft -1- from the transmission in direction of -arrow A-.

Fig 2: Install Left Flange Shaft Into Transmission When Doing This, Insert Flange Shaft Centrally Into Shaft Seal On Front Differential
GWWA37-10809Courtesy of AUDI OF AMERICA, LLC

-- Remove the torque converter, refer to TORQUE CONVERTER, REMOVING AND INSTALLING .