Securing On Engine And Transmission Holder

Special tools and workshop equipment required

Holding Plate VW309A
Hook And Support Tool 3311 with bolt Hook and Support Tool - Bolt 3311/1
Engine And Transmission Holder VAS6095

Procedure

Fig 1: Securing Transmission To Hook And Support Tool 3311 And Holding Plate VW 309

Courtesy of AUDI OF AMERICA, LLC

Hold the transmission with the Shop Crane VAS6100, refer to TRANSMISSION, TRANSPORTING .

-- Attach the Holding Plate VW309A to the Hook And Support Tool 3311.

-- Place the transmission using the Shop Crane VAS6100 in the Engine And Transmission Holder VAS6095.

NOTE:

The vents for the transmission housing and final drive must be closed before turning a filled transmission with oil pan upward on the engine and transmission holder.