Right Camshaft Timing Chain
- Bolt
- 80 Nm +90°
- Replacing
- Camshaft Chain Sprocket
- For the exhaust camshaft
- Removing and installing, refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Bolt
- 80 Nm +90°
- Replacing
- Camshaft Adjuster
- For the intake camshaft
- Identification "Intake"
- Removing and installing, refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .NOTE:
Depending on the version the camshaft adjuster has three or four notches. The illustration shows a camshaft adjuster with four notches.
- Bolt
- Tightening specification -item 15- in OVERVIEW - TIMING MECHANISM DRIVE CHAIN .
- Mounting Pin
- For the right camshaft timing chain drive sprocket
- Asymmetrical version
- Installed position, refer to Figure
- Drive Chain Sprocket
- For the right camshaft timing chain
- Installed position, refer to Figure
- Right Camshaft Timing Chain
- Mark the running direction with paint for reinstallation
- Remove from the camshafts, refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Removing and installing, refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .
- Thrust Washer
- For the right camshaft timing chain drive sprocket
- Asymmetrical version
- Installed position, refer to Figure
- Chain Tensioner
- For the right camshaft timing chain
- Removing and installing, refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Glide
- Bolt
- 9 Nm