LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> A6 2.0T >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Rear Final Drive 0BC, 0BD, 0BE & 0BF) >> 39 Final Drive, Differential >> Removal And Installation >> Left Seal, Replacing >> Left Seal, Replacing, 0BC >> Removing

Left Seal, Replacing, 0BC: Removing

WARNING: This page is about a different variant/trim than selected.

-- General Repair Instructions. Refer to REPAIR INFORMATION .

-- Remove the rear final drive. Refer to FINAL DRIVE .

Remove Right Flange Shaft 

Fig 1: Removing Right Flange Shaft
GWWA39-10264Courtesy of AUDI OF AMERICA, LLC

-- Attach the PullerT10037 to the housing -arrow- and remove the flange shaft.

Left Flange Shaft, Removing 

Fig 2: Removing Left Flange Shaft
GWWA39-10263Courtesy of AUDI OF AMERICA, LLC

-- Attach the PullerT10037 to the housing -arrow- and remove the flange shaft.

-- Use a suitable tool to pry out the seal.

Fig 3: Prying Out Sealing Ring With Suitable Lever
GWWA39-0373Courtesy of AUDI OF AMERICA, LLC