Input Shaft Seal, Replacing, 0BF: Notes
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- PullerVW 391
- PullerT10055
- -2- AdapterT10055/2
- Two bolts M 8 x 30
- Thrust PieceT10380
- Assembly ToolT40222
- Assembly ToolT40222/1
- Sealing GreaseG 052 128 A1
- Inductive HeaterVAS 6414
- or
- Commercially Available Heating Plate
- and
- Digital ThermometerVAS 6519