ATF, Draining, 0BF
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Drip Tray
- ATF plug overview, refer to GEAR OIL DRAIN AND INSPECTION PLUGS OVERVIEW, 0BF .
-- Remove the ATF check plug -arrow- so that the ATF drains faster.
-- Remove the ATF drain plug -arrow- and drain the ATF.
-- Install the new drain plug -arrow- and tighten. Tightening specification -item 15- in FINAL DRIVE 0BE, 0BF OVERVIEW .
-- Fill the ATF in the rear final drive. Refer to ATF, FILLING, 0BE, 0BF .