Rollover Support Trim, Removing And Installing: Removing
WARNING:
Follow the safety precautions for the rollover protection. Refer to ROLLOVER PROTECTION .
-- Open the convertible top until the displayed position of the top and the convertible top compartment cover is reached.
-- Support the convertible top with a suitable wood rod.
-- Disconnect the battery ground cable. Refer to BATTERY .
-- Unhook the hooks on the rollover support trim -1- through the openings in the rollover protection aluminum mount -arrow A-.
-- At the same time, push the trim with the :3409 upward -arrow B- to prevent the hooks from getting hooked in again.
-- Do this to all 4 hooks and then remove the trim.