LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> TT S, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 90 (Gears, Shafts - Manual Transmission 02Q AWD (Roadster)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Output Shaft, 1ST To 4TH Gears >> Installation Position Of Locking Collar/Synchronizer Hub For 1ST And 2ND Gear

Installation Position Of Locking Collar/Synchronizer Hub For 1ST And 2ND Gear

WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Installation Position Of 1St And 2Nd Gear Locking Collar/Synchro-Hub
GWWN35-0252Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals