Output Shaft For 5TH/6TH Gear And Reverse Gear: Notes
WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Thrust Plate VW 401
- Thrust Plate VW 402
- Punch VW 407
- Punch VW 408 A
- Thrust Disc VW 412
- Tube 60 mm Dia. VW 415 A
- Thrust Pad 16.5/28 mm Dia. VW 431
- Thrust Tube VW 455
- Thrust Pad VW 510
- Tube 42 mm Dia. VW 516
- Sleeve VW 519
- Thrust Pad 30 - 11
- Thrust Piece 40 - 105
- Sleeve 40 - 20
- Thrust Plate 2050
- Tube 3296
- Tapered Roller Bearing Puller V.A.G 1582
- Attachment V.A.G 1582/4
- Grip V.A.G 1582/7
- Thrust Pad Con. 8/65 VW 433
- Thrust Tube VW 454
- Support Channels VW 457
- Holding Fixture VW 801
- Kukko 21/7 internal puller
- Separating tool 17/2
- Kukko 22/2 counter-support