SUBFRAME Mount Assembly Overview

WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Subframe Assembly Overview

Courtesy of AUDI OF AMERICA, LLC

Bolt
- Transmission support to transmission
- Tightening specifications, refer to Description and Operation or Description and Operation ,
Bolts
- Pendulum supports to transmission
- Replace
- 40 Nm plus an additional 90° (¹ /₄ ) turn.
Engine Support
Bolt
- Engine support to engine
- 45 Nm
Engine Mount
- With support arm
Bolt
- Engine mount to body
- Replace
- 40 Nm plus an additional 90° (¹ /₄ ) turn.
Bracket
Bolt
- Bracket to engine mount
- Replace
- 20 Nm plus an additional 90° (¹ /₄ ) turn.
Bolt
- Bracket to body
- Replace
- 20 Nm plus an additional 90° (¹ /₄ ) turn.
Bolt
- Engine mount to body
- Replace
- 40 Nm plus an additional 90° (¹ /₄ ) turn.
Screws
- Engine mount to engine support
- Replace
- 60 Nm plus an additional 90° (¹ /₄ ) turn.
Pendulum Supports
Bolt
- Pendulum supports to subframe
- Replace
- 100 Nm plus an additional 90° (¹ /₄ ) turn.
Bolt
- Transmission mount to transmission support
- Tightening specifications, refer to Description and Operation or Description and Operation
Bolt
- Transmission mount to body
- Tightening specifications, refer to Description and Operation or Description and Operation
Transmission Mount
- With support arm
- Illustration shows version for direct shift automatic transmission.
Bolt
- Transmission support to transmission
- Tightening specifications, refer to Description and Operation or Description and Operation
Bolt
- Transmission support to transmission
- Tightening specifications, refer to [Description and Operation or Description and Operation
Transmission Support