Transmission, Transporting

WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Transmission Support Jig 3336
Shop Crane VAS 6100

Procedure

-- Secure the 3336 to the clutch housing.

Fig 1: Adjusting Support Arm On Sliding Piece With Locking Pin

Courtesy of AUDI OF AMERICA, LLC

-- Adjust support arm on sliding piece with locking pin -arrow-.

Number of visible holes = 9.

-- Lift the transmission with the VAS 6100 and 3336.

-- Set down the transmission, for example in a transport container.