Shift Mechanism Assembly Overview, Transmission Side
WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Grease bearing areas and slide surfaces with grease G 000 450 02.
- Bushing for Selector Shaft
- Removing and installing, refer to item 16
- Selector Shaft
- With shift cover
- Can be removed and installed with transmission installed
- O-ring
- Replace
- Insert into surrounding groove of shift cover
- Install coated with gear oil
- Cap for Transmission Breather
- Selector Shaft Seal
- Replace, refer to SELECTOR SHAFT SEAL
- Bolt
- Replace
- 20 Nm