Remove the Selector Relay Lever with Catch from the Transmission Shift Lever -arrow 1- and Attach

WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Disconnecting/Connecting Cable Retainer From Selector Cable

Courtesy of AUDI OF AMERICA, LLC

Removal

-- Press in the catch -arrow 1- to the stop and remove the selector relay lever together with the control cable retainer. Move the selector relay lever in the operating direction.

NOTE:

Ignore -arrow 2-.

Securing

NOTE:

To install, grease mounting points and contact surfaces with grease G 000 450 02.

-- Press the control cable retainer onto the selector relay lever, refer to PRESS THE SELECTOR CABLE RETAINER ONTO THE SELECTOR RELAY LEVER

-- Insert the selector relay lever together with the control cable retainer to the stop.

The catch -arrow 1- secures the selector relay lever.
The catch -arrow 2- secures the control cable retainer.
Make sure it engages securely.