Remove the Selector Relay Lever "with Clip" from the Transmission Shift Lever -arrow 1- and Attach

WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Tab Pressed Down To Remove Relay Lever Together With Cable Retainer

Courtesy of AUDI OF AMERICA, LLC

Removal

-- Remove the clip -arrow 1-, and remove the selector relay lever together with the control cable retainer.

Securing

NOTE:

Grease bearing areas and slide surfaces with grease G 000 450 02.

-- Insert the selector relay lever together with the control cable retainer to the stop.

-- Press on the clip -arrow 1- while ensuring that it engages securely.

NOTE:

Ignore -arrow 2-.