LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> S5 4.2, Standard >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Controls, Housing - Manual Transmission Internal Components 0B4 AWD (Coupe) >> 34 Controls, Housing >> Disassembly And Assembly >> Gearshift Rails And Selector Forks

Gearshift Rails And Selector Forks

NOTE:

Removing the shift fork group from the bearing brackets for the input and output shafts. Refer to SHIFT FORK GROUP, INPUT SHAFT, 1ST, 2ND AND REVERSE GEAR OUTPUT SHAFTS OVERVIEW .

Fig 1: Exploded View Of Gearshift Rails & Selector Forks
GWWA34-10632Courtesy of AUDI OF AMERICA, LLC
  1. Gearshift Rail / Reverse Gear Shift Fork
  2. Gearshift Rail / Shift Fork for 1st and 2nd Gear
  3. Ball Sleeve
    • Remove and install, for example, using locking ring pliers (for the outer races) from the gearshift rail / shift fork
  4. Gearshift Rail / Shift Fork for 3rd and 4th Gear
  5. Gearshift Rail / Shift Fork for 5th and 6th Gear
    • With yoke for the gearshift rail / shift fork mounting
    • The shift fork cannot be separated from the yoke.
scientia non olet · About LEMON Manuals