LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2011 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 233 (Gears, Shafts - Manual Transmission Internal Components 0B2 AWD (Cabriolet)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Input Shaft >> Input Shaft, Assembling >> Inserting Spring Into Selector Gear

Inserting Spring Into Selector Gear

WARNING: This page is about a different car, the 2010 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.

The bent end of the spring -arrow- must be hooked into the hole in the selector gear.

Fig 1: Inserting Spring Into Gear
GWWV35-1036Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals