Tail Pipes, Replacing

Special tools and workshop equipment required 

• Chain Pipe Cutter VAS6254

Procedure 

Fig 1: End Pipe, Replacing

Courtesy of AUDI OF AMERICA, LLC

• Tightening specifications. Refer to OVERVIEW - MUFFLER .

-- Separate the tailpipe -1- at the separating point -C- using Chain Pipe Cutter VAS6254.

-- Mount the tail pipe -3- up to the marking -A-. Align the slot in the tail pipe with the marking -B-.

-- Tighten clamping sleeve nut -2-.