Input Shaft Seal, Replacing, 0BE: Notes

Special Tools And Workshop Equipment Required 

• Thrust Pad 16.5/28 mm Diameter VW 431
• Puller T10055
• -2- Adapter T10055/2
• Thrust Piece T10380
• Assembly Tool T40247
• Guide Sleeve T40247/1
• -1- 2-Arm Puller Kukko 20/10
• Inductive Heater VAS 6414
• or
• Commercially Available Heating Plate
• and
• Digital Thermometer VAS 6519
• Drip Tray
• Sealing Grease G 052 128 A1