Overview - Wheel Set, Reverse Drive Gear, Gearshift Mechanism

Fig 1: Overview Of Wheel Set, Reverse Drive Gear And Gearshift Mechanism

Courtesy of AUDI OF AMERICA, LLC

1. Transmission Housing
   • With differential and pinion
2. Input and Output Shafts with Shift Fork Group
   • Disassembling and assembling. Refer to OVERVIEW - WHEEL SET .
3. Oil Catch Tray
   • Gets clipped in to the bearing bracket
4. Reverse Drive Gear
   • With the reverse shaft
   • Reverse drive gear assembly overview; refer to Fig 2
5. Oil Guide Element
6. Magnet
   • Clean off

Fig 2: Reverse Drive Gear Assembly Overview

Courtesy of AUDI OF AMERICA, LLC

1 - Reverse Drive Gear

Installation position: The shoulder faces the transmission housing.

2 - Needle Bearing

3 - Reverse shaft support

4 - O-Ring

5 - Reverse Shaft

Slide the O-ring onto the circular groove, -arrow- item 4.

The threaded hole on the reverse shaft must line up down the center with the opening on the reverse shaft support.