Overview - Shift Forks
WARNING: This page is about a different variant/trim than selected.
NOTE:
Removing the shift fork group from the bearing brackets for the input and output shafts. Refer to OVERVIEW - WHEEL SET .
- Gearshift Rail / Reverse Gear Shift Fork
- Gearshift Rail / Shift Fork for 1st and 2nd Gear
- Ball Sleeve
- Remove and install, for example, using locking ring pliers (for the outer races) from the gearshift rail / shift fork
- Gearshift Rail / Shift Fork for 3rd and 4th Gear
- Gearshift Rail / Shift Fork for 5th and 6th Gear
- With yoke for the gearshift rail / shift fork mounting
- The shift fork cannot be separated from the yoke.