LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 966 (Seats System (Frames- Service Information - 2 Of 2)) >> Seat Frames >> Front Seat Pneumatic System >> Overview - Pneumatic System >> Overview - Pneumatic System, Multi-Contour Seat Through 08/2012

Overview - Pneumatic System, Multi-Contour Seat Through 08/2012

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

For repair instructions and test methods for pneumatic components. Refer to PNEUMATIC LINES, SERVICING .

Fig 1: Pneumatic System, Multi-Contour Seat Exploded View
GWWA72-11233Courtesy of AUDI OF AMERICA, LLC
  1. Seat Bolster Inflation Adjustment
  2. Driver Multi-contour Seat Compressor -V439-
  3. Backrest Bolster Inflation Adjuster
  4. Check Valve
    • Depending on the version, separate component or integrated in the multi-contour seat control module
    • Remove the external check valve if installing a Multi-contour seat control module that contains a check valve. Refer to the Parts information.
  5. Massage Mat
  6. Driver Multi-contour Seat Control Module -J873-
  7. Valve Block 1 in Driver Seat -N475-
  8. Pulsation Damper
  9. Module Carrier with Air Cushions for Lumbar Support
  10. Valve Block 2 in Driver Seat -N476-