LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 966 (Seats System (Frames- Service Information - 2 Of 2)) >> Seat Frames >> Front Seat Pneumatic System >> Overview - Pneumatic System >> Overview - Pneumatic System, Multi-Contour Seat From 09/2012

Overview - Pneumatic System, Multi-Contour Seat From 09/2012

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

For repair instructions and test methods for pneumatic components. Refer to PNEUMATIC SYSTEM, CHECKING .

Fig 1: Pneumatic System, Multi-Contour Seat Exploded View
GWWA72-11696Courtesy of AUDI OF AMERICA, LLC
  1. Left Seat Bolster Inflation Adjuster
  2. Left Backrest Bolster Inflation Adjuster
  3. Valve Block 2 in Driver Seat -N476-
  4. Valve Block 1 in Driver Seat -N475-
  5. Massage Mat
  6. Valve Block 3 in Driver Seat -N523-
  7. Right Backrest Bolster Inflation Adjuster
  8. Right Seat Bolster Inflation Adjuster
  9. Module Carrier, Air Cushions for Lumbar Support
  10. Driver Multi-contour Seat Compressor -V439- with Integrated Driver Multi-contour Seat Control Module -J873-
scientia non olet · About LEMON Manuals