LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 962 (Climate Control System (Service Information - (Front Heater & A/C Unit) CAEB, CGXB, CEUC, CTUA, CEUC, CAED, CHJA, CPNB, CRDB, CPNB, CREC, CTGE, CYNB, CWUC, CREH, CWUB)) >> Air Conditioning >> Front Heater And A/C Unit >> Heater And A/C Unit, Disassembling And Assembling >> Air Intake Duct, Removing And Installing >> Installing

Air Intake Duct, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Installation is done is reverse order, observe the following: 

-- Insert the air intake duct on the guide -E- so that the securing tab lock into the mount.

-- Tighten the bolts -A- to the tightening specification. Refer to OVERVIEW - HEATER AND A/C UNIT AIR INTAKE HOUSING .

-- Install the air intake housing. Refer to AIR INTAKE MANIFOLD, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals