LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 956 (Engine Assembly -CLAB, CLAA, CDUC, CGQB, CKVB, CKVC, CDUD, CPNB, CTCB, CTCC, CVUA, CVUB) >> Engine Assembly >> SUBFRAME Mount >> Transmission Mount, Removing And Installing >> Transmission Mount, Removing And Installing, Vehicles With MULTITRONIC >> Removing

Transmission Mount, Removing And Installing, Vehicles With MULTITRONIC: Removing

WARNING: This page is about a different car, the 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the tunnel crossmember. Refer to OVERVIEW - SUBFRAME MOUNT [For transmission(s) 0BK] .

-- Remove the bolts -1- and lower stop -2- for the transmission mount.

GWWA37-10742Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -4- and transmission mount -5- from the transmission support -3-.

scientia non olet · About LEMON Manuals