Boot Assembly
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Dimension -a- 2 mm.
-- Align tie rod so that tie rod ball joint pints are in installation location.
-- Insert the tie rod into the wheel bearing housing as far as the stop.
-- Install the front wheel. Refer to WHEELS AND TIRES .
-- To determine if an axle alignment is required, see Table. Refer to EVALUATING NEED FOR AXLE ALIGNMENT .
The axle alignment must be performed on a VW/Audi approved alignment stand.