LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Manual Transmission And Differential) >> Main Shaft Assembly for Single-Range >> Removal

Main Shaft Assembly for Single-Range: Removal

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the manual transmission assembly from the vehicle. < Ref. to REMOVAL , Manual Transmission Assembly. >
  2. Remove the transfer case together with the extension case assembly. < Ref. to REMOVAL , Transfer Case and Extension Case Assembly. >
  3. Remove the transmission case. < Ref. to REMOVAL , Transmission Case. >
  4. Remove the drive pinion shaft assembly. < Ref. to REMOVAL , Drive Pinion Shaft Assembly. >
  5. Remove the main shaft assembly for single-range.
scientia non olet · About LEMON Manuals