LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (Anti-Theft System - Security And Locks) >> Key Lock Cylinders >> Replacement >> Front Door

Front Door

WARNING: This page is about a different car, the 2012 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the front door glass to the top position.
  2. Remove the front door trim. < Ref. to FRONT DOOR , REMOVAL, Door Trim . >
  3. Remove the sealing cover. < Ref. to REMOVAL , Front Sealing Cover . >
  4. Remove the rod clamp.
  5. Remove the plug to the rear of the door panel.
  6. Loosen TORX® bolt (1).
    Fig 1: Plug At Door Panel And TORX® Bolt
    G07666535Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the key cylinder along with the handle cover.
  8. Remove the key cylinder from the cover, and replace the key cylinder.
    Fig 2: Removing Key Cylinder From Cover
    G07666536Courtesy of SUBARU OF AMERICA, INC.