Overview - Entry Assistance, Super Sport Seat
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Two different versions of the backrest may be installed:
- Backrest frame with bracket.
- Backrest frame with support plate
- Note the allocation of the handle with bracket and the entry assistance trim. Refer to Parts Information.
NOTE:
The four-way lumbar support and seat frame are not shown in the illustration.
- Backrest Frame
- With bracket
- The bracket cannot be removed
- Release Cable
- For the backrest release
- One piece
- Removing and Installing. Refer to BACKREST RELEASE CABLE, REMOVING AND INSTALLING, STANDARD SEAT/SPORT SEAT/SUPER SPORT SEAT .
- Adjusting. Refer to BACKREST RELEASE CABLE, ADJUSTING, STANDARD SEAT, SPORT SEAT, SUPER SPORT SEAT .
- Bearing
- For the backrest release cable
- Release cables component
- Clipped to the backrest frame
- Rivet
- Quantity: 2
- Support Plate
- Riveted to the backrest frame
- There are different versions. Refer to the Parts Information for the allocation.
- Removing and Installing. Refer to ENTRY ASSISTANCE SUPPORT PLATE, REMOVING AND INSTALLING .
- Backrest Frame
- For support plate versions
- Button
- For entry assistance
- Removing and Installing. Refer to ENTRY ASSISTANCE BUTTON, REMOVING AND INSTALLING .
- Entry Assistance Trim
- Removing and Installing. Refer to ENTRY ASSISTANCE TRIM, REMOVING AND INSTALLING, POWER .
- Bolt
- 3.5 Nm
- Quantity: 2
- Bolt
- 3.5 Nm
- Connecting Cable
- For the backrest release
- Between the handle and bracket
- Engaged in the handle and bracket
- Removing and Installing. Refer to ENTRY ASSISTANCE CONNECTING CABLE, REMOVING AND INSTALLING .
- Handle
- With bracket (entry assistance)
- For the backrest release
- Removing and Installing. Refer to ENTRY ASSISTANCE HANDLE WITH BRACKET, REMOVING AND INSTALLING .
- Bracket
- For the backrest release cable
- Riveted to the backrest frame
- Removing and Installing. Refer to BACKREST RELEASE BRACKET, REMOVING AND INSTALLING .
- Bracket
- For the backrest release cable
- Quantity: 2
- Release cable component
- Riveted to the backrest frame
- Pin
- For the backrest release
- On both sides
- Backrest hinge component