LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1094 (Automatic Transmission - 10R80 (2 Of 2)) >> Diagnosis And Testing >> Diagnostic Trouble Code (DTC) Charts and Pinpoint Tests - 3.5L EcoBoost (272kW/370PS) >> Pinpoint Tests >> Pinpoint Test N : DTC U0103 >> Notes

Pinpoint Test N : DTC U0103: Notes

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
Refer to Wiring Diagram Transmission Controls for schematic and connector information.
Normal Operation and Fault Conditions 
The TCM sets the DTC U0103 when key messages such as desired gear, or actual gear position are not received for longer than 5 seconds. This loss of key messages degrades the transmission functionality. Other modules that require data from the GSM all set communication DTCs and may also exhibit system function concerns.
DTC Fault Trigger Conditions 
DTC Description Fault Trigger Condition
TCM U0103:00 Lost Communication With Gear Shift Control Module A: No Sub Type Information Sets in continuous memory in the TCM if ABS data messages received from the GSM over the HS-CAN are missing for longer than 5 seconds.

Possible Sources 

Network communication concern

TCM

GWM