LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2010 >> S4 Automatic DCT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1009 (Wiper & Washer Systems (Service Information)) >> 92 Wiper/Washer Systems >> Windshield Wiper System >> Wiper Blade, Removing And Installing >> Removing

Wiper Blade, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Bring the windshield wiper into the service position. Refer to WINDSHIELD WIPER, BRINGING INTO SERVICE POSITION .

-- Lift the windshield wiper arm off the windshield.

-- Press the clip in direction of -arrow A- and slide the wiper blade -1- off of the windshield wiper arm -2- in direction of -arrow B-.

GWWA92-10076Courtesy of AUDI OF AMERICA, LLC

-- Remove the wiper blade.