Oil Pan, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
NOTE:
Clean working conditions for the automatic transmission. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
General repair instructions. Refer to GENERAL REPAIR INFORMATION .
-- Remove the tunnel crossmember. Refer to TUNNEL CROSSMEMBER, REMOVING AND INSTALLING .
-- Remove the subframe crossbrace. Refer to SUBFRAME CROSSBRACE, REMOVING AND INSTALLING .
-- Drain the ATF -arrow-. Refer to ATF, DRAINING AND FILLING .
-- Remove the bolts from the ATF pan opposite the tightening sequence: -13 to 1-.
-- Remove the ATF oil pan.