Right Seal, Replacing: Installing
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal. Note the following:
-- Lightly coat the outer circumference of the new shaft seal with oil.
-- Install the new right flange shaft seal all the way without tilting it.
-- Fill the space between the sealing and dust lip halfway with Sealing Grease G 052 128 A1.
-- Install the right flange shaft. Refer to REMOVING AND INSTALLING - "Install The Right Flange Shaft".
-- Fill transmission fluid in transmission and check the fluid level. Refer to TRANSMISSION FLUID LEVEL, CHECKING . Remove the oil filler plug -arrow- to do this.