Overview - Rear Final Drive, AUDI A4, A5 Coupe /SPORTBACK/Cabriolet, A6, A7
WARNING: This page is about a different variant/trim than selected.
- Subframe
- Removing and installing. Refer to SUBFRAME .
- Bolt
- 95 Nm
- Bolt
- 55 Nm
- Left Drive Axle
- Removing and installing. Refer to DRIVE AXLE .
- Bolt
- 20 Nm
- Heat Shield
- Rear Final Drive
- Removing and installing. Refer to REAR FINAL DRIVE, REMOVING AND INSTALLING, AUDI A4, A5 COUP E /SPORTBACK/CABRIOLET, A6, A7 .
- Additional work after replacing the rear final drive. Refer to REAR FINAL DRIVE, ADDITIONAL WORK AFTER REPLACING .
- Driveshaft
- Removing and installing. Refer to DRIVESHAFT BOLTED ON TRANSMISSION SIDE, REMOVING AND INSTALLING .
- Right Drive Axle
- Removing and installing. Refer to DRIVE AXLE .