Glow Plugs, Removing And Installing: Installing
WARNING: This page is about a different variant/trim than selected.
-- Carefully install the glow plugs by hand or with a hose without bending it.
-- Tighten the glow plugs with Glow Plug Socket3220 or Glow Plug SocketVAS6454 to the tightening specification.
- Glow plug tightening specification: 17 Nm
-- Connect the glow plug connector and make sure it is secure.
Further installation is performed in reverse order.
- Intake manifold flap motor tightening torque. Refer to OVERVIEW - INTAKE MANIFOLD