Reducing Agent Metering System Control Module -J880-, REMOVING AND INSTALLING: Installation
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal. Note the following:
- Tightening specification. Refer to Reducing Agent Metering System Control Module -J880- OVERVIEW .
-- Install the sill panel strip. Refer to SILL PANEL STRIP, REMOVING AND INSTALLING .
-- Install the right rear single seat in the second row of seats. Refer to Seat Frames .
-- Connect the battery and complete the steps required after connecting the battery. Refer to BATTERY, DISCONNECTING AND CONNECTING .