Left Intermediate Pipe, Removing And Installing: Installation
WARNING: This page is about a different variant/trim than selected.
Install in reverse order of removal. Note the following:
- Tightening specifications, refer to EXHAUST MANIFOLD OVERVIEW and EXHAUST GAS RECIRCULATION OVERVIEW .
NOTE:
Replace the seals, o-rings and the self-locking nuts.
-- Install the air duct hoses and screw-type clamps .
-- Install the exhaust gas recirculation auxiliary cooler. Refer to EGR AUXILIARY COOLER, REMOVING AND INSTALLING .
-- Install the rear coolant pipes. Refer to REAR COOLANT PIPE, REMOVING AND INSTALLING .
-- Install primary catalytic converter. Refer to PRIMARY CATALYTIC CONVERTER, REMOVING AND INSTALLING .