Front Coolant Pipe On Engine, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specifications. Refer to OVERVIEW - COOLANT PIPE ON ENGINE .

NOTE:

Replace the O-ring.

Secure all hose connections with standard production hose clamps. .

-- Clean and/or smooth the sealing surfaces of the O-rings.

-- Coat the O-ring with coolant and slide it onto the coolant pipe.

-- Install the air guide pipe. Refer to OVERVIEW - AIR GUIDE PIPES AND AIR GUIDE HOSES .

-- Install the air filter. Refer to AIR FILTER .

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .