Check Valve For Cylinder Bank 1 (Right), Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specifications. Refer to OVERVIEW - COOLANT PIPE ON ENGINE .

-- Install the engine support. Refer to OVERVIEW - SUBFRAME .

-- Install the air filter. Refer to AIR FILTER .

-- Install the starter and generator. Refer to STARTER, REMOVING AND INSTALLING .

-- Install the engine mount. Refer to ENGINE MOUNT AND ENGINE SUPPORT, REMOVING AND INSTALLING .

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .