ATF Pan, Removing And Installing: Installing
WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, 2013 Audi Q7, 2012 Audi Q7, and 2011 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Clean all magnets in oil pan recesses. Make sure the magnets touch the ATF pan completely.
-- Install the ATF pan with a new gasket -1-.
-- Make sure all spacer sleeves -2- are completely inside the new seal -1-.
-- Tighten the ATF oil pan bolts diagonally and in several steps.
-- Fill with ATF. Refer to FILLING ATF .