LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2009 >> Q7 4.2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (3.0L - Exhaust System & Emission Controls - Engine Code: CNRB) >> 26 Exhaust System, Emission Controls >> Reducing Agent Metering System >> Reducing Agent Tank Cap Switch -F502-, REMOVING AND INSTALLING >> Removing

Reducing Agent Tank Cap Switch -F502-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2015 Audi Q7, 2014 Audi Q7, and 2013 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Follow all safety precautions. Refer to SELECTIVE CATALYTIC REDUCTION (SCR) SYSTEM SAFETY PRECAUTIONS .

Follow the guidelines for clean working conditions. Refer to FUEL SUPPLY, INJECTION SYSTEM AND CHARGING SYSTEM CLEAN WORKING CONDITIONS .

-- Remover the reducing agent active tank. Refer to REDUCING AGENT ACTIVE TANK, REMOVING AND INSTALLING .

-- Free up the wire -2-.

Fig 1: Installed Position and Tightening Specification for Reducing Agent Tank Cap Switch -F502-.
GWWA26-11370Courtesy of AUDI OF AMERICA, LLC

-- Loosen the bolt -1- and then remove the Reducing Agent Tank Cap Switch -F502- from the active tank.